Aquaguard Reviva RO

12,490.00 11,500.00

Aquaguard Reviva RO is an RO water purifier best suited for water with high TDS, having a salty taste. It is equipped with a unique RO technology membrane that removes excess TDS and blocks impurities and chemical contaminants dissolved in water. Its Electronic Membrane Life Enhancer prevents accumulation of dissolved salts like Calcium & Magnesium enhancing the service life of the RO membrane. Only Aquaguard, with Advanced Mineral Guard Technology removes dangerous new age contaminants like lead, pesticides, while retaining essential natural minerals in water, that other RO purifiers deplete.


  • Recommended for
    Water sourced from borewells, with high TDS giving it a salty/khara/brackish taste.
  • Unique RO technology
    Unique RO technology membrane removes excess TDS, blocks dissolved impurities and chemical contaminants, while retaining essential minerals in the drinking water.
  • Electronic Membrane Life Enhancer
    Prevents the accumulation of dissolved salts like calcium and magnesium. This enhances the service life of the RO membrane and improves water flow.
  • Smart Auto Fill
    Ensures water is filled automatically in the storage tank thereby ensuring purified water on tap all the time.
  • Large Storage Capacity
    It comes with an 8-litre in-built storage tank. Thereby ensuring purified water on tap, all the time.

Technical Specifications:

Purifying Technology Reverse Osmosis (RO)
Applicable TDS Range in Input Water 500 – 2000 mg/litre
Recommended for Salty/Khaara/Brackish water
Check suitability for your water type
Filtration / Purification Modules
(Click on modules to know more)
I-Filter, Chemi Block, EMLE, Reverse Osmosis Membrane, Taste Enhancer Cartridge
Installation Type Table Top and Wall Mounting
Purified Water Flow Rate* 12 litre/hour
Storage Tank 8 Litres
TDS Reduction 90 % (approx)
% Water Recovery 25% approx
Dimensions (W X D X H) in mm 320 X 275 X 410
Net weight 8.5 Kg
Operating/Input Voltage 230 V AC/50HZ
Power Rating/Consumption 40 Watts

Other Technical Specifications

RO Membrane 75 GPD
Membrane Type Thin Film Composite RO
Booster pump voltage 24V DC
Input Water Pressure* (max) 2.0kg/
Input Water Pressure* (min) 0.6 kg/
Input Water Temperature 10°C – 40°C
Input Water Chlorine 0.2 mg/litre (max.)
Input Water Iron 0.3 mg/litre (max.)
Input Water Turbidity 15 NTU (max.)

Note: Technical Specifications are subject to change without prior notice.

* Flow rate depends on the input water pressure and condition of the filters.

*If the water pressure you receive is higher than the maximum specified, the use of a pressure reducing valve is recommended. The above accessory is available with our company at an additional cost.

*If the water pressure you receive is lower than the minimum specified, the use of an external pump attachment is recommended. The above accessory is available with our company at an additional cost.


There are no reviews yet.

Be the first to review “Aquaguard Reviva RO”

Your email address will not be published. Required fields are marked *